Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Styles & brands we work with
See the difference
Before
After
Before
After
Before
AfterHow Much Does Duct Repair & Sealing Cost in Fresno?
Duct repair and sealing in Fresno typically costs between $350 and $1,800, with most homeowners paying $700 to $1,100 for a standard job covering multiple leaks and minor repairs. A full-system diagnostic with sealing of 8 to 12 duct joints usually lands around $850. Larger homes, crawlspace work, and sections that need replacement can push the total past $2,500.
Those numbers reflect what we see across Fresno, Clovis, and the surrounding foothill communities in 2026. The single biggest variable is access: ductwork in a walkable attic costs less to work on than ducts buried in a tight crawlspace under a 1950s ranch house in the Tower District. We’ll break down exactly what drives the price so you can compare estimates with confidence.
Duct Repair & Sealing Cost Breakdown (2026)
Here’s what we quote in the Fresno market as of early 2026. These are real working numbers from jobs our team has priced this year, not national averages pulled from a database.
| Service | Price Range | What It Includes |
|---|---|---|
| Duct inspection & leak diagnostic | $95 – $250 | Visual inspection, pressure testing where needed, written findings and photos |
| Sealing 4 – 6 accessible duct joints | $250 – $450 | Mastic sealant or metal tape on accessible joints, minor reconnection |
| Sealing 8 – 12 duct joints (typical whole-system job) | $500 – $900 | Mastic sealing of supply and return joints, small patch repairs |
| Single duct run replacement (flex duct, 10 – 15 ft) | $300 – $600 | Material, removal of old run, installation, sealing at both ends |
| Duct section repair (metal or flex, per section) | $200 – $450 | Cutting out damaged section, splicing in new material, sealing |
| Crawlspace duct repair (moderate access) | $450 – $1,100 | Working in low-clearance space, often with insulation repairs |
| Full duct sealing project (average 2,000 sq ft Fresno home) | $850 – $1,800 | Sealing of accessible supply and return ductwork, multiple repairs, before/after airflow check |
What moves the price? The biggest drivers in Fresno are access, duct material, and how much of the system is leaking. A single-story home in Sunnyside with a roomy attic is the least expensive scenario. A two-story home in Woodward Park where ductwork runs through a finished ceiling is significantly more involved, because the repair often requires cutting drywall access panels. We’ll walk through each factor below so you can spot what applies to your house before you call.
Every job we price gets a written quote before any work starts. No estimate ranges that turn into surprises. No upselling after we’re in the attic.
What Affects Duct Repair & Sealing Pricing in Fresno
- Access to the ductwork. Attic ducts in a single-story northwest Fresno home are straightforward to reach. Ductwork in a tight crawlspace, or runs buried under blown-in insulation in an older Fig Garden house, take longer and cost more to work on safely.
- Age and condition of the existing ducts. Homes built before 1990 in Fresno often have metal ducts with failing tape at the joints, or early flex duct that has degraded in the heat. The older the system, the more sealing points it needs. A 1970s ranch in McLane with original ductwork is a different job than a 2015 build in Copper River Ranch.
- Number of leaks and their location. Some homes have one obvious separation at a boot. Others have dozens of small leaks along every seam, which is common when ducts were installed during a rushed tract-home build in the 2000s. A pressure test tells us how much air the system is losing, and that number drives the repair scope.
- Duct material. Flex duct is cheaper to repair or replace than rigid metal. But flex duct in Fresno attics degrades faster in the summer heat, so older flex runs sometimes need full replacement rather than patching. Metal ducts hold up better but cost more per foot when sections need replacing.
- Whether insulation needs repair or replacement. Ductwork insulation gets torn when repairs happen, and in Central Valley summers, uninsulated ducts sweat and lose cooling efficiency fast. If the job includes re-wrapping or replacing insulation, expect an additional $150 to $500 depending on how many feet of duct are exposed.
- Permit requirements. Most duct repair and sealing in Fresno doesn’t require a permit, but if the scope expands to replacing a substantial portion of the duct system, the city of Fresno may require one. We handle permitting when it’s needed, and it adds $100 to $300 to the total.
Is It Cheaper to Repair or Replace Ductwork?
Repairing and sealing is cheaper in almost every case. Full duct replacement in Fresno runs $3,000 to $7,000 for an average 2,000-square-foot home, while comprehensive repair and sealing is typically under $1,800. Replacement makes sense only when ducts are collapsed, mold-contaminated, or so degraded across the entire system that patching would mean repairing more than 60% of the runs.
Here’s a quick comparison based on a typical Fresno home:
| Project | Typical Cost | When It’s the Right Call |
|---|---|---|
| Seal and repair existing ducts | $350 – $1,800 | System is structurally sound, leaks are at joints and seams |
| Partial replacement (1 – 3 runs) | $600 – $1,500 | Specific runs are collapsed, crushed, or torn beyond patching |
| Full duct replacement | $3,000 – $7,000 | System-wide damage, contamination, or ducts past their serviceable life |
If you’re in a newer home in a development like Loma Vista and notice one room never cools properly, you’re probably looking at a single collapsed flex run or a disconnected boot, a $300 to $600 fix. If you’re in an older home in the Tower District with original metal ducts that have been patched for decades, the math may point toward replacement. We’ll tell you honestly which one makes sense for your house, and we’ll show you the condition of the ducts with photos before you decide.
Signs You Need Duct Repair or Sealing
Before you spend money on a diagnostic, here’s what actually indicates a duct problem in a Central Valley home:
- Rooms that never reach the thermostat setting. In Fresno summers, a room that stays 5 to 8 degrees warmer than the rest of the house often points to a disconnected or crushed duct run feeding that room.
- Dust accumulation that returns within days of cleaning. Leaky return ducts pull in air from the attic or crawlspace, and that air carries dust, insulation fibers, and whatever else is up there. If you dust on Sunday and see a film by Wednesday, the ducts are suspect.
- Higher cooling bills than similarly-sized homes in your neighborhood. PG&E bills in Fresno spike hard from June through September. If your usage per square foot runs 20 to 30% above your neighbors’, leaky ducts are frequently the cause. Sealing them can drop cooling costs 15 to 25% in some homes.
- Musty or stale smells when the system first kicks on. That’s usually return-duct leaks pulling crawlspace air into the house. In older Fresno neighborhoods with vented crawlspaces, this is extremely common.
- Visible damage in the attic. If you’ve been in the attic and seen collapsed flex runs, torn insulation, or gaps at metal joints, you already know there’s a problem. What you can’t always see is how much air the system is losing, which is where a diagnostic test helps.
Heads up on the safety side: if you go into the attic to look at ductwork yourself, watch for exposed electrical wiring, and never step on drywall between joists. We’d rather you call us for the inspection. It costs less than a through-the-ceiling accident, and the written diagnostic with photos gives you something concrete to review with us or with any other contractor.
How Duct Sealing Works – What You’re Actually Paying For
Here’s the honest version of what a duct sealing job involves in a Fresno home, so you understand where the labor hours go.
First, we locate every leak. On accessible ductwork, that means a visual inspection plus a pressure test that measures how much air the system loses. We use professional-grade equipment from Rotobrush and Nikro for diagnostics, and we photograph everything so you see the leaks yourself. Then we seal. For metal ducts, that means mastic sealant applied at every joint and seam, not tape. Mastic is a paste that hardens into a permanent, airtight seal. For flex duct, it means reconnecting runs, replacing crushed sections, and sealing connections at the plenum and boots. At the end, we run an airflow check to confirm the fix.
That second-pass verification matters. A lot of companies seal what they can reach and leave. We test airflow before and after on every repair job, and we give you the before and after readings in writing. You’ll know exactly what changed.
Fresno-Specific Cost Factors Most Guides Don’t Mention
National pricing guides miss what actually drives cost in this market. Here are three things specific to Fresno that affect what you’ll pay:
The summer attic heat. Fresno attics hit 140 to 150 degrees in July and August. That’s not just uncomfortable. It degrades flex duct, melts old duct tape adhesive, and makes early-morning or late-day work windows necessary. Repairs in the peak summer months sometimes require scheduling around the heat, and that can add a small premium in July and August. If you can schedule sealing work in spring or fall, you’ll have more flexibility on timing.
Valley fever considerations in crawlspaces. Fresno County is an endemic zone for valley fever, a fungal infection from disturbed soil. If we’re working in a dirt-floor crawlspace under an older home in Calwa or Mayfair District, we take dust control seriously, using proper respirators and minimizing soil disturbance. This adds a modest cost to some crawlspace jobs but protects both our technicians and your household air quality.
The winter fog and early duct wear. Years of winter tule fog and damp conditions take a toll on ductwork in uninsulated crawlspaces, particularly in older parts of Fresno. Metal ducts rust at the seams, and flex duct outer jackets deteriorate. Homes in the older central Fresno grid often need more sealing points per linear foot than newer construction on the city’s edges.
How to Save on Duct Repair & Sealing
You can reduce what you spend on duct repair in Fresno without cutting corners. Here’s what actually works:
- Get the diagnostic first, then decide. A $95 to $250 diagnostic with written findings and photos tells you exactly what needs work. That’s much cheaper than paying for exploratory repair work that may not address the real problem. We quote the repair from the diagnostic, not from guesswork.
- Bundle sealing with cleaning if both are needed. If your ducts are leaking and dirty, doing both on the same visit saves on the second trip charge and saves equipment setup time. We’ll tell you if cleaning is actually needed, or if sealing alone solves the problem. We won’t sell you a cleaning you don’t need.
- Ask about off-peak scheduling. Spring and fall are our lighter seasons in Fresno. If your repair isn’t urgent, scheduling for October or April gives you more flexibility and sometimes a small discount on multi-section work.
- Seal the whole system at once rather than in pieces. Paying for a tech to come out three separate times for three separate leaks costs more than one comprehensive visit. If the diagnostic shows multiple leaks, do them all in one job. The per-leak cost drops significantly.
- Check for rebates before you commit. PG&E and some state efficiency programs occasionally offer rebates for duct sealing when it’s part of a broader energy-efficiency project. We stay current on Fresno-area programs and will flag any applicable rebate during your estimate. Rebates vary and aren’t always available, so ask us what’s current.
The most direct way to find out what your specific project will cost is to call us at (559) 272-4989. Estimates are free, and the price goes in writing before any work starts. No obligation, no pressure.
Can You Repair or Seal Ductwork Yourself?
You can handle very small, very accessible fixes in a walkable attic: reconnecting a flex run that has slipped off a boot, or applying mastic to a visible joint you can comfortably reach. If you can see the problem and reach it without crawling over insulation or squeezing through tight framing, a $15 tub of mastic and 30 minutes of work is reasonable for a confident DIYer.
But most real duct problems in Fresno homes aren’t that simple. Ducts in crawlspaces, leaks hidden under insulation, pressure testing to find leaks you can’t see, and any repair involving a gas furnace connection or electrical components are professional work. Ductwork is part of your HVAC system, and a badly sealed return plenum can pull combustion gases into the living space. That’s not a risk worth taking.
If you attempt a DIY repair and it doesn’t fix the airflow problem, we’ll still come out and do it properly. Just know that some DIY repairs, especially foil tape applied over dust or onto flex duct, actually make professional sealing harder and can add a small amount of labor to the job.
FAQs – Duct Repair & Sealing Cost
How much does duct sealing cost per vent in Fresno?
Duct sealing in Fresno typically costs $40 to $80 per vent when calculated per register or return, with most whole-home jobs landing between $500 and $900 for a standard 2,000-square-foot house. That per-vent range assumes accessible ductwork and a typical number of joints at each register boot. Call (559) 272-4989 for a written quote based on your actual duct layout.
Is duct sealing worth the cost?
For most Fresno homeowners with leaky ducts, sealing pays for itself within 2 to 4 years through lower cooling bills. A $700 to $900 sealing job that reduces cooling costs by 15 to 20% saves $150 to $300 per year in a typical Fresno home with high summer AC usage. If your energy bills are running above average for your home’s size, sealing is one of the fastest-return HVAC investments you can make.
How much does it cost to repair a disconnected duct?
Repairing a disconnected duct in Fresno costs $150 to $400 when the duct is accessible in an attic. If the disconnection is in a crawlspace or requires drywall access, the price runs $400 to $800. The repair itself is usually straightforward; the variable is how long it takes to safely reach the disconnection point.
Can duct repair be done the same day?
Yes, most standard duct repairs in Fresno are completed in one visit, usually 3 to 6 hours depending on the number of leaks and the access situation. We carry common flex duct sizes, mastic, and repair materials on every truck, so the majority of repairs are done the same day we diagnose them. Call (559) 272-4989 in the morning, and in most cases we can have a tech out the same day.
How much does a full duct replacement cost in Fresno?
Full duct replacement in Fresno runs $3,000 to $7,000 for a typical 2,000-square-foot home, with the final price depending on access, duct material, and how much drywall work is needed in finished spaces. Metal duct replacement runs higher than flex. Before recommending replacement, we’ll show you photos of your existing ducts and explain whether repair and sealing, typically under $1,800, can solve the problem instead.
Does homeowners insurance cover duct repair in Fresno?
Homeowners insurance typically covers duct repair only when the damage results from a covered peril, like a fire, storm, or a contractor’s mistake during a covered remodel. Normal wear, aging, and leaks from poor installation are not covered by standard policies. We can provide documentation and photos for your insurer if your situation involves a covered claim, and we’ll walk you through what your policy likely covers before any work starts.
Why Fresno Homeowners Choose Linden Air Duct Fresno for Duct Repair
Here’s what you should know about who’s coming to your door, because that’s the part of this decision most companies gloss over.
Every technician we send to a Fresno home is background-checked and identity-verified under the Threshold Verified standard. Before your appointment, you receive the technician’s name and photo. At the door, they show a photo ID badge. No anonymous contractor in an unmarked van. No confusion about who’s in your house. If you’re home alone, if you have kids, if you’re an older homeowner who’s been burned by a stranger in the driveway before, that protocol matters.
Linden Air Duct Fresno has been serving homeowners as part of the Threshold Group family since 2004. Led by Marcus Veale, our team handles air duct cleaning, dryer vent cleaning, and air duct repair across Fresno, Clovis, and the surrounding communities. We use professional-grade equipment from Rotobrush and Nikro, and we work with air-quality products from Honeywell, Aprilaire, Abatement Technologies, and Guardsman.
Here’s how our commitments work, in plain terms:
- Written price before any work starts. Not a verbal estimate. Not a range that becomes a bigger number on the invoice. A written quote, every time, with no exceptions.
- Written guarantee on every repair. If a covered repair fails, we come back at no charge. That’s the 365-Day Done Right Promise, and it’s in writing on every repair job.
- A live person answers 24/7. Call at 2 a.m. with a duct emergency and you’ll talk to a human being, not a voicemail tree. That’s been our standard for years, and it’s not changing.
We started this business in 2004 because Fresno homeowners kept telling us the same stories: technicians who didn’t show up, prices that changed at the end of the job, repairs that failed within months with no recourse. The Threshold Standard exists to put those stories where they belong, in the past.
If you’re comparing quotes, compare them line by line against what we’ve listed above. Ask other companies whether their price comes in writing before work begins. Ask whether their guarantee is written. Ask who’s actually showing up at your door. The answers will tell you what you need to know.
Call for a Free Duct Repair Estimate in Fresno
You deserve a real number, not a vague range. Call (559) 272-4989 and we’ll walk through what’s going on with your ductwork, schedule a diagnostic if needed, and put your price in writing before any work begins. A live person answers, day or night, from our team here in Fresno.
The diagnostic is honest. The price is written down. The guarantee is real. And the person at your door will be exactly who we said they’d be.
Pricing reflects the Fresno market as of 2026. Linden Air Duct Fresno offers free estimates – call (559) 272-4989.
Written by Marcus Veale, Owner at Linden Air Duct Fresno, serving Fresno since 2004. See our home page for all services, or learn more about our Duct Repair & Sealing in Fresno process.
What Our Customers Say
"I liked that I knew who was coming in. Name and photo texted ahead, badge at the door. He was quiet, careful with the furniture, and thorough."
- Cheryl A."Tech arrived with a badge and a printed sheet of what he'd be doing. Ran a camera through the main trunk before and after so I could see the dust difference. Vents smell cleaner already."
- Gina R."We had construction dust packed into every register after a remodel. They sealed off the returns, used negative pressure, and left the floors cleaner than they found them."
- Paul E.