Whole-home duct cleaning
Dryer vent cleaning
Camera inspection
Sanitizing & deodorizingWhole-system duct and dryer vent check with before-and-after photos - you see exactly what came out of your vents
That "$99 whole-house special" is a bait ad - the real number appears once they are in your hallway, or the "clean" is a shop-vac at the register. We photograph the inside of your ducts before and after instead.
Styles & brands we work with




See the difference
Before
After
Before
After
Before
AfterFull System Cleaning in Fresno, CA
Full system cleaning means we clean every component of your HVAC air distribution network, not just the main trunk lines. In Fresno, where summer temperatures routinely pass 100 degrees and your AC runs for months, this service removes the dust, pollen, and construction debris that builds up inside supply ducts, return ducts, registers, the blower compartment, and the air handler. It’s the most complete cleaning we offer, and it’s the one we recommend for homes here because the Central Valley’s dust load is heavier than what most duct systems are designed to handle. Call (559) 272-4989 and we’ll give you an honest, written price before any work starts.
If you want to understand how full system cleaning fits into the bigger picture, start with our Air Duct Cleaning in Fresno page, which covers all three of our core services.
Key Takeaways
- Full system cleaning covers every part of the air path: return drops, supply runs, registers, plenums, blower cabinet, and coil enclosure.
- Most Fresno homes we see need it for the first time between years 5 and 10 of occupancy, or sooner if you’ve had construction or remodeling work.
- Typical pricing runs $425 to $775 for a single-family home in Fresno, depending on square footage and number of returns.
- We put the price in writing before we start. No add-ons, no surprise final invoice.
- Every technician is background-checked, identity-verified, and photo-badged. You’ll see their name and photo before they arrive.
When You Need Full System Cleaning
Here in Fresno, dust moves through homes differently than it does in coastal cities. We get fine agricultural silt from the west side, pollen from almond and citrus blooms in the spring, and the particular gray-white dust that comes from drywall and stucco work in every neighborhood from Fig Garden to Clovis. If your system has never been cleaned, or it’s been several years, you’re circulating that mix through every room. Here’s what tells us a full system cleaning is overdue:
- Dust returns to surfaces within days of cleaning. You wiped the shelves on Sunday and by Thursday they’ve got a film. That’s not housekeeping; that’s your return ducts pulling in dust and your supply ducts pushing it back out. We see it constantly in Fresno homes built before 2010, when tighter return-side filtration wasn’t standard.
- Uneven temperatures in rooms that used to feel fine. When the kids’ bedroom never gets cool while the living room feels like a meat locker, the problem is often a supply run that’s partially blocked by built-up debris. Full system cleaning locates those restrictions and removes them.
- You’ve had any kind of renovation. Drywall sanding, tile cutting, cabinet installation, floor refinishing: all of it puts fine particulate into the air, and your HVAC system is the destination. In neighborhoods like Tower District and Huntington Boulevard, where older homes are being renovated, this is the single most common reason we’re called. Construction dust clogs coils and blower wheels faster than anything else.
- A musty or stale smell when the system kicks on. That odor is usually microbial growth or accumulated organic material sitting inside the coil area or the duct liner. Fresno’s high summer humidity, especially during the monsoon weeks in July and August, gives it the moisture it needs to get started.
- Family members with allergies or asthma are worse at home. Pollen that enters your duct system can stay there for months, circulating on every cycle. A full cleaning removes that reservoir. We also work with products from Honeywell and Aprilaire for filtration improvements if your system would benefit.
- You don’t know when the system was last cleaned. If you bought your house and nobody handed you a duct cleaning record, it probably hasn’t been done. The average Fresno home we first visit hasn’t had any duct cleaning in 8 to 12 years.
Our Full System Cleaning Process
We don’t wave a vacuum hose at your vents and call it done. Our Air Duct Cleaning services at Linden Air Duct Fresno follow a methodical process that treats your home like a job site we’re responsible for, because we are. Here’s how it goes:
- Inspection and access mapping. Before any equipment comes out of the truck, we locate every register, every return, and the air handler. We check the filter condition, look at the coil access points, and identify any sections of duct that show signs of past repairs or crushed areas. We look in the crawlspace and attic, because in Fresno’s older homes in the Tower and McLane areas, that’s where surprises live.
- Register and return face removal. We carefully remove each register face and mark it so it goes back in the same spot. We also remove the return grilles. This gives us full access to the duct openings without needing to cut holes in your walls, which we avoid unless the duct layout leaves us no other option, and if that’s the case, we’ll tell you before we do it.
- Negative-pressure extraction. We connect a high-powered negative air machine to your duct system using professional equipment from Nikro. Negative-pressure extraction means we’re pulling air out of the ducts while agitating the interior surfaces loose. The debris goes into the machine’s HEPA filtration, not into your living room. This is the method recommended by the National Air Duct Cleaners Association for residential systems, and it’s the only method we use for full system cleaning.
- Mechanical agitation of all duct surfaces. While the negative pressure is running, we run rotating brush tools through every accessible duct run. Brushes reach the walls of the duct and knock loose the film that suction alone can’t remove. This step is what separates a real cleaning from a surface-level blow-and-go. It takes time, and that time is built into the price you agreed to up front.
- Blower, coil, and cabinet cleaning. We open the air handler access, clean the blower wheel and housing, and clean the evaporator coil if it’s accessible. A dirty blower wheel loses airflow efficiency; a dirty coil loses cooling capacity. In a Fresno summer, that’s the difference between a system that holds 75 degrees and one that wheezes at 80. If the coil is too far gone for cleaning to help, we’ll tell you straight and talk to you about repair options instead of selling you a cleaning that won’t fix the real problem.
- Final system check and cleanup. We run the fan, verify airflow at each register, and confirm the system cycles properly with the thermostat. We replace the filter with a clean one, or install one you’ve provided if you have a preference. Then we check every room we worked in, vacuum any debris that escaped during register removal, and walk you through what we found and what we did.
What Makes Our Cleaning Different
You can find a dozen duct cleaning ads in Fresno. Most of them undercut each other on price and bet you won’t notice the difference. Here’s what we do differently, and why it matters if you’re the one opening the door.
Every technician who arrives at your home has been background-checked and identity-verified as part of the Threshold Standard. Before the visit, you’ll get the technician’s name and photo. When they knock, they’ll show a photo ID badge. You’ll know exactly who you’re letting in. For homeowners who are often home alone, parents with young kids, and older neighbors who’ve been burned by high-pressure salespeople, that specific proof is the whole game.
We also operate with a rule that sounds basic but is surprisingly rare in this business: the price is in writing before we start. Not a range, not a “starting at,” not a verbal estimate that changes when you see the invoice. The exact dollar amount, on paper, signed by you and us. If we find something unusual during the job that changes the scope, we stop, explain it, and get your written approval on a revised number before we continue. That’s the Linden way, and it’s been the way since 2004.
And if something’s not right after we leave, we don’t argue with you. The 365-Day Done Right Promise covers every full system cleaning we perform. If the work isn’t right, we make it right, in writing, for 365 days after the job. That’s a standing commitment, not a sales line.
Full System Cleaning Pricing in Fresno
Full system cleaning in Fresno typically runs $425 to $775 for a single-family home, with most homes falling between $475 and $600. That’s the honest range for a real, complete cleaning of the entire duct system, air handler, blower, and coil. Here’s how the numbers break down:
| Home Size / System Type | Typical Price Range | What’s Included |
|---|---|---|
| 1,000 – 1,500 sq ft, single return | $425 – $525 | All supply/return ducts, registers, blower, accessible coil, cleanup |
| 1,500 – 2,500 sq ft, two returns | $525 – $650 | Everything above, plus additional return runs and longer duct reach |
| 2,500 – 3,500+ sq ft, multiple returns | $650 – $775 | Larger duct volume, longer agitation time, additional register count |
| Add-on: Dryer vent cleaning | + $75 – $120 | Logged separately, done while we’re on site |
What moves the price up or down? Square footage is the biggest factor, because it drives total duct length. Return Duct Cleaning affects timing too: a home with a return in every bedroom (common in newer Clovis builds) takes longer than a single-central-return floor plan typical of older Fresno homes. Accessibility matters: a crawlspace that’s tight or an attic that’s deep with blown-in insulation adds time and care, and we price that honestly.
If your system has never been cleaned and you have pets or did any recent renovation, expect to be at the higher end of the range because the agitation step simply takes longer. We’d rather tell you that before we show up than rush a job to hit a number.
Every estimate is free, and it’s the exact number you’ll pay. Call (559) 272-4989 and we’ll schedule a walkthrough, answer any question, and put the price in writing before anything gets cleaned.
Frequently Asked Questions
How long does full system cleaning take in Fresno?
Most single-family homes take between 3 and 5 hours for a complete Residential Duct Cleaning, depending on square footage, number of returns, and how much buildup is present in the ducts. We schedule full mornings or afternoons so the job is done right, not done fast.
Will full system cleaning help with allergies?
It removes the accumulated pollen, dust, and dander reservoir inside your ducts, which is a real reduction in the allergens your system circulates. Homes with family members who have allergies or asthma often notice a difference within the first week, especially during Fresno’s spring bloom and the late-summer dust season. If you want to go further, ask us about pairing the cleaning with a Honeywell or Aprilaire whole-home filtration upgrade while we’re on site.
Is full system cleaning worth the money compared to a basic cleaning?
If your system has only mild dust in the main trunk lines, a basic cleaning may be enough. But if you’ve never cleaned the system, see dust returning quickly, had any construction, or notice musty odors, full system cleaning is the option that actually fixes the problem. A trunk-line-only cleaning leaves the Supply Duct Cleaning and branch runs untouched, which means you’ve paid for half a job. We’ll tell you which one your system actually needs after we look at it; we won’t upsell you into work that isn’t necessary.
Can you clean the ducts without damaging them?
Yes, with the right equipment and the right technique. We use negative-pressure extraction with mechanical agitation from Nikro equipment, which cleans duct walls without stressing seams or joints. We’re careful around older metal ductwork, which is common in Fresno homes from the 1960s and 70s, and we’ll flag any existing damage we find before touching it. If something needs repair instead of cleaning, we’ll tell you and give you a separate written price; we won’t just clean over a problem and call it done.
How much does full system cleaning cost in Fresno?
Full system cleaning in Fresno typically costs $425 to $775 for a single-family home, with most homes landing between $475 and $600 depending on square footage and number of returns. Every estimate is free and the price is guaranteed in writing before we start. Call (559) 272-4989 for an exact quote.
Can you come to my neighborhood in Fresno?
We serve all of Fresno and the surrounding area, including Fig Garden, Tower District, Huntington Boulevard, Woodward Park, Bullard, River Park, Sunnyside, and the newer developments up toward Clovis. Call (559) 272-4989 and a live person will answer, any hour of the day or night.
Call Linden Air Duct Fresno for Full System Cleaning
You’ll speak to a real person when you call (559) 272-4989. We’ll schedule a walkthrough, give you a written price before any work begins, and send you the technician’s name and photo before the visit. The job is done right, or we make it right, for 365 days. That’s the whole deal, in writing, every time.
Written by Marcus Veale, Owner at Linden Air Duct Fresno, serving Fresno.